Do you spend a lot of time in your car? If so, you’re not alone.
In fact, most people spend more time behind the wheel than they do at home. That’s why it’s so important to keep your vehicle in the best possible condition. And one of the most crucial aspects of car maintenance is caring for your engine.
Cleaning a car engine is the best way to make it last as long as possible. This article takes a look at tips like changing your fuel filter and air filter so that your automobile will run smoothly and have plenty of power when you need it most. Keep reading to get the inside scoop from the professionals.
1. Let Your Engine Cool Down
First of all, give your engine a chance to cool down before working on it. An engine that’s hot to the touch will likely burn your hands, plus it will steam when sprayed with water or a clean product.
If you’re planning to clean at the end of a day of driving, park it in the shade and let it sit for at least an hour.
Once it has cooled sufficiently, pop the hood and make sure it’s cool enough to touch without risking injury.
2. Remove Your Battery
Next, you’d be wise to remove the battery so that neither the battery nor the connections get damaged when you spray the engine with water.
Remove the battery cover, disconnect both terminal connections, then carefully lift out the battery and set it aside.
Place the car battery somewhere safe and dry where it will be out of the way while you work on the engine.
3. Buy a Degreasing Product
You’re going to need a few supplies to keep your engine nice and clean. These include a new air filter, oil filter, and fuel filter. You’ll also need a degreasing spray so that the engine will end up looking as clean and shiny as possible.
You should also invest in a good air filter cleaner.
4. Use Brush with Synthetic Bristles
Spray down the entire engine compartment with the degreaser you purchased. Keep in mind that this product doesn’t have to be anything special or expensive. A common kitchen degreaser will work fine or ask your local auto parts store for recommendations.
Now use a brush with soft synthetic bristles to clean off the grease. Never use metal bristles on your engine or you’ll risk scratching everything.
5. Rise the Engine
When you’ve successfully scrubbed the engine with cleaner and your brush, rinse it thoroughly with water. Just make sure that all the important oil and fluid reservoirs are properly capped so that moisture can’t get inside during the rinsing process.
6. Let it Dry, Repeat as Needed
Once the engine is rinsed, give it time to dry. Wait at least an hour or so and then take a look at the results. Depending on how dirty your engine was, you might need to repeat the cleaning process another time or two.
Your Complete Guide to Cleaning a Car Engine
Maintaining your car is important. Fortunately, these tips for cleaning a car engine will help.
Keep scrolling to discover more useful lifestyle tips on our blog.