A Introductory Guide to Construction Dust Control 

When you think about construction sites, you can imagine loud noises and loads of heavy machinery moving around with materials. However, what site managers sometimes overlook is construction dust control.

If weather conditions are a particular way, dust can become a serious problem for you and your workers. But, when will you need to think about dust control? And, what are the specific reasons why you need it?

Read on to get answers to the questions above. We’ll also allude to some proven techniques you can use to prevent potentially dangerous levels of dust from engulfing your site.

Why You Need Dust Control Solutions

Without proper dust control, you can end up spreading harmful dust particles to areas nearby. For example, polluted dust might travel and settle in nearby water sources. Or, it could pollute plants and habitats nearby.

You can also create dust storms if you’re not careful. These can be a hindrance to your workers, your machines, and local traffic close to your worksite.

When To Implement Dust Control Measures

If you inspect the topsoil on-site and see that it’s very dry, you should consider dust control measures. Another indicator is if there is a lot of loose sand on-site.

It will be easier to deal with the topsoil if it’s flatter when reducing construction dust. However, if the site is more challenging, you may need construction dust control equipment. 

How To Control Construction Dust

There are a few different measures you can take for preventing or reducing construction dust.

Using vegetation to control the spread of dust is one way to reduce its unwanted effects. Planting vines works well at preventing large amounts of dust from flying all over the site. They are a sensible solution when other solutions might not be allowed, like using asphalt, for example.

Another way to reduce or even prevent dust from swirling out of control is to use water. The great thing about using water is it’s so cheap and you can use it almost anywhere on a job site. Although, contractors should be careful to use measured amounts so as not to create unwanted run-offs.

You can also use polymers for construction dust prevention. You use them in combination with the soil on-site and water. The polymers act in a way where they fuse the soil together with a reaction when you apply water. Using this method tends to be a lot faster than if you were to go down the vegetation option of prevention.

One last option is to understand the wind direction on site. If you can do this well, you can then put up wind blockers. 

Construction Dust Control Is Important

In the end, you have to consider construction dust control before you start hammering away and dragging heavy machinery onto a job site. If you overlook it, it might come back to bite you on the nose later down the line.

So we hope you found this quick bit of advice helpful. If so, we have plenty more to offer on our main blog page.